WOUCOOL 600Mg magnesium alloy metalworking fluid adopts Wenou's unique anti hard water and corrosion inhibition technology. It is an excellent performance magnesium alloy metalworking fluid with good antimicrobial stability, lubricity, cleanliness, cooling and rust prevention properties. Suitable for cutting and grinding of materials such as magnesium alloys, copper alloys, and aviation aluminum.
◆ Semi synthetic product with excellent lubrication performance, effectively extending tool life.
Excellent resistance to hard water and corrosion inhibition, especially suitable for processing magnesium alloys, copper alloys, and aviation aluminum. It is also recommended for long-term processing of large aluminum alloy workpieces (continuous processing for more than 24 hours).
Good cleaning and rust prevention performance ensures the cleanliness and high cleanliness of machine tools and equipment, providing sufficient rust protection for the equipment.
◆ Long service life and excellent biological stability.
| Appearance (concentrated solution) | Light yellow transparent liquid |
| Appearance (10% diluent) | Transparent semi transparent liquid |
| Odor (concentrated solution) | mild |
| PH (typical operating range) | 8.7-9.5 |
| PH (diluted with 10% tap water) | 8.9 |
| Refractive index | 1.40 |
| Stability against hard water | 2000ppm excellent |
| 1: Dilute 8-1:15 with tap water | |
| Cutting Processing | 6%-15% |
| Grinding | 5%-7% |
| Design concentration range | 5%-15% |
· When processing copper alloys, the appearance of the working fluid may turn blue, but it will not cause copper soap to adhere to the workpiece or machine.
· When the working concentration of this product is controlled above 6%, its tank life and rust prevention effect are more guaranteed.
· When processing copper alloys and magnesium alloys, it is recommended to increase the frequency of removing metal shavings, once per shift.
· If you need more product application information, including performance optimization. Please call our staff for consultation.
Process: tapping, drilling, grinding, turning, milling, sawing, high-speed turning and milling.
Water quality: Suitable for soft to high hardness water conditions (can withstand water hardness>10000ppm).
Materials: magnesium alloy, aluminum alloy, and copper alloy. Not recommended for use in engineering plastics.
Industries: Aerospace, Automotive, 3C, New Energy, Drones, Robotics, Medical.
Packaging specifications: small drum (18kg), large drum (180kg) or according to customer requirements
Storage conditions: Store in a cool and ventilated place, 4-40 ℃, sealed, with a shelf life of 6 months
1. When diluting, it is recommended to use clean tap water and avoid mixing it with other coolant to prevent performance deterioration.
2. It is recommended to store in a dry place at 4-40 ° C. Please seal and store when not in use.
3. For the initial liquid preparation, the concentration should be appropriately increased. The concentration of the working fluid should be monitored and controlled within a reasonable range. If the machine tool does not start for many days, the tank fluid should be regularly circulated and oxygenated.
4. The comprehensive evaporation rate of water, concentration of working solution, supplementary water and concentrated solution.
5. Pour the concentrated solution into an appropriate amount of water, stir evenly, and then add it to the equipment.
6. When using (replacing) new liquid, the equipment should be cleaned first, and it is recommended to use Wenou machine tool cleaning agent.
7. The machine tool should have a complete filtration and slag removal system to promptly remove impurities such as metal shavings and floating oil.
WeChat 
Mini Program Address: 1155 Ronghua Road, Songjiang District, Shanghai
Phone/Fax: 021-57677290
Copyright © 2026 Shanghai Wenou Industrial Media Co., Ltd. All rights reserved Record number: Shanghai ICP No. 2023003999-1 
Shanghai Public Security Registration No. 31011702890580
Home
